Tuesday, December 22, 2009

The Cradle




In the two weeks that have passed since the turning, I have cleaned out the inside of the hull, removing all the cobwebs and epoxy that had squeezed through when filling the holes. The next step here will be to fill all the joins and do fillets where necessary and then the fitting out can start.


In the meantime I have also constructed the cradle and layed concrete blocks for it to stand on.

Monday, December 7, 2009

AWESOME!!!!!!












That is how Saturday was. The turning went better than I could have hoped for and a great time was had by all who attended the Turning and the after party. Thanks to all those who came and made it such a great day. It is sometimes unwise to thank people individually in case you leave someone out who might feel hurt, but there are a few people who need special mention. First and foremost my Father who taught me all I know and Maureen for support and encouragement along the way. The diggers, Theo, Brendon and Skatie who pitched in and dug out the ground as she was turning. Patrick for steadying the ship as she went over and all those who assisted in turning. All the ladies who assisted with food and salad preperations and Skatie (once again) who took it upon himself to organise the fires and braai the meat. Christine and Roy for taking pictures to capture the moment (attached pictures by Roy).
More pictures of the turning coming soon.

Tuesday, December 1, 2009

TIDIDI has a list.




Work has been going on at a frantic pace over the past few weeks, getting everything ready for the turning. Phineas spent the past two weekends digging a hole under the boat to allow it to turn. Fortunately the ground is soft and apart from having to dig through some Wattle roots it went quite smoothly.
This past weekend I removed the last of the supports which the boat was still resting on and she settled onto the A-frames perfectly. I was able to swing her slightly with very little effort by hand, which made it easier to dig the last of the ground out. If the way she turns on the pinions is anything to go by, then turning on the 5th should go without any hitches. If the balance is right all we will need is one block just to stop her from turning too quickly and if everything were perfect we would probably not even need that.


Wednesday, November 18, 2009

Final preparation for turning.




I am busy now with final preparations for the turning on the 5th of December. The Bow and Transom pinions are complete and fitted, together with their respective A-frames. These are ready to fully support the boat once the building stocks have been completely removed.
This coming weekend, I will be getting some help to start digging underneath the boat in order for it to turn. I am also getting the underside, below the waterline ready for the second coat of primer and will be completing this together with the waterline by next weekend. Topsides will be finished off once the boat is upright.

Monday, November 9, 2009

Getting ready to turn




The last two weeks have been very productive, having sanded, sealed and painted the hull with the first primer coat. I had originally taken a week off work for this but extended it to two weeks in order to achieve this. I have also now completed the aft pinion assembly and am ninety percent finished with the bow pinion and A-frame. The only other thing that remains with these is the A-frame for the transom pinion. In theory this should work and Roy from CKD has used this method in practise successfully, so here's holding thumbs.

Thursday, November 5, 2009

Now it's really starting to look like a boat.




Albeit upside down still, but we are getting closer to the turning on the 5th of December. Pictures show the first coat of primer going on. This should be completed tomorrow, after which any imperfections will be filled and sanded ready for the second coat. The vertical lines which can be seen in the top picture are the overlapping spray lines which are not completely dry.

Thursday, October 29, 2009

Sanding and Sealing


The hull has now been sanded and the process of soaking and sealing with epoxy started. This will be completed this morning. Once this is set it will be lightly sanded ready for the first coat of primer.

Drilling the Keel Holes


In order to make the drilling of the 22 holes for the Keel bolts easier, I made a guide which helped keep the drill straight.

Monday, October 12, 2009

Countdown to Turning

Finally, all the holes have been filled and all that remains is to sand the hull, seal it and paint. There are a few other small things which need doing, like drilling the holes for the Keel and Skeg, making a cradle, making the frameworks for the pinions and A-frames and doing a bit of excavation. If all goes according to plan we will be having a huge party on the 5th of December.





I have now also completed a scale model of Tididi as well as the boat shed in order to get a better understanding of how it will turn and to work out where there is excavation needed. The top of the box depicts the ground level with relevant slopes allowing me to work out exactly how deep I need to dig to accomodate the arc the boat will take.













Wednesday, September 30, 2009

Keel and Skeg packing blocks







Finally, another update. Inclement weather as well as being involved in making cabinets for a paying customer have slowed progress a bit. However in between all of this I have finished and fitted the Keel packing block and fitted the rudder and skeg packer ready to be flattened. All that now remains is to finish filling the holes, before sanding and sealing the entire hull with epoxy.